Blog

Oct 27, 2024

Arthroscopic mini tunnel suture bridge for ACL tibial avulsion fractures repair | Scientific Reports

Scientific Reports volume 14, Article number: 25096 (2024) Cite this article 116 Accesses Metrics details The study presents an arthroscopic transosseous suture bridge technique for repairing avulsion

Scientific Reports volume 14, Article number: 25096 (2024) Cite this article

116 Accesses

Metrics details

The study presents an arthroscopic transosseous suture bridge technique for repairing avulsion fractures of the tibial insertion of the anterior cruciate ligament (ACL), specifically tailored for adolescent patients. The technique utilizes two mini tunnels, integrating the principles of transosseous tunneling and suture bridging to ensure stable fixation while minimizing the impact on the bone bed. Over a seven-year period, 39 patients with Meyers-Mckeever types II, III, and IV tibial avulsion fractures underwent this procedure. The surgery had an average duration of 52.7 min and resulted in decreased swelling and pain within two months postoperatively. All patients achieved full knee extension and over 120° of flexion. X-rays confirmed complete fracture healing within six to 12 months, and negative anterior drawer test and Lachman test indicated stable fixation. Significant improvements were seen in Lysholm and IKDC scores. This technique offers several advantages: it is effective, stable, and particularly suitable for adolescents due to the reduced impact on the bone bed and successful avoidance of epiphyseal plate injury.

The avulsion fracture at the tibial insertion of the anterior cruciate ligament (ACL) is a rare type of knee joint injury, commonly seen in adolescents, accounting for 2.5% of all pediatric knee injuries1. Because the fracture occurs at the tibial attachment site of the ACL and the fracture fragment can be easily displaced due to the pull of the ligament, non-surgical treatment often yields poor results. In clinical practice, numerous instances of comminuted ACL avulsion fractures have been encountered, where simple screw fixation has proven to be inadequate for restoring the ligament’s tension2. Consequently, displaced avulsion fractures at the tibial attachment require surgical treatment, either through open repair or arthroscopically assisted techniques, with the latter being considered the superior approach.

In children, the tibial insertion of the ACL is not fully ossified, and the tendon-bone interface consists of only a thin layer of fibro-cartilage, making it difficult for screws to achieve effective fixation. Some surgeons had adapted the suture bridge technique, originally used for rotator cuff repair, for repairing avulsion fractures at the tibial insertion site of the ACL3,4. This technique uses cables to generate high contact pressure, providing robust fixation and achieving excellent therapeutic outcomes, without the need for a second surgery to remove the device. However, due to the requirement of inserting three or four anchors, and considering that the bone bed at the tibial insertion site in children is relatively small, the insertion of too many anchors might have a significant impact on the bone bed in children5,6.

The purpose of this study was to evaluate the results of arthroscopic transosseous suture bridge for repairing tibial avulsion fractures of the ACL with a modified mini tunnel technique. The authors hypothesized that this mini tunnel and suture bridge technique could provide enough stability fixations and anatomical reduction for the fracture fragment, protect the contact surface of the bone bed, and successfully avoid injury to the epiphyseal plate. The refined surgical skills and clinical efficacy of this technique are reported in the subsequent findings.

A retrospective analysis was conducted on 39 cases of various types of tibial avulsion fractures of the ACL admitted to our department from July 2016 to July 2023. They exhibited varying degrees of pain, swelling, and limited mobility, with positive anterior drawer test and Lachman test. Preoperatively, patients underwent thorough knee joint CT-3D and MRI examinations to ascertain the type of fracture and to check for any concomitant injuries (Table 1).

This is an retrospective study. The Research Ethics Committee of the Affiliated Hospital of North Sichuan Medical College has approved this study (2024ER0186). Adhering to the ethical principles of the 1964 Declaration of Helsinki, we obtained informed consent forms signed by all patients’ guardians prior to the operation.

Initially, the anesthetic epidural needle was modified by straightening its tip to create a hollow steel needle for bone tunneling. The outer diameter of this needle was 1.8 mm, and the inner diameter was 1.2 mm, which was suitable for positioning with a 1.0 mm Kirschner wire (K-wire). Using an ACL reconstruction aiming device, 1 mm K-wires were placed on the medial and lateral sides at the anterior edge of the bone bed, with a minimum distance of 10 mm between the two wires. Subsequently, the epidural needle was fitted over the K-wire, and the tunnel was manually and slowly drilled open (Fig. 1). This method results in a smaller diameter bone tunnel, positioned at the junction of the footprint area bone bed and the articular cartilage surface, thus having minimal impact on the bone bed .

This figure illustrates the procedural steps involving the modified epidural needle and the minimal tunnel creation method. (a) The curvature of the epidural needle tip hinders the passage of the 1.0 mm K-wire; (b) the tip of the epidural needle is straightened using hemostatic forceps; (c) with the tip straightened, the 1.0 mm K-wire can now smoothly pass through the epidural needle; (d) the epidural needle is inserted over the 1.0 mm K-wire, with the tail end held and slowly advanced while rotating in both directions, utilizing the sharp tip of the epidural needle to create a mini tunnel.

All patients were operated by the same surgical team under arthroscopy. Anesthesia was performed using lumbar anesthesia, with the patient in a supine position and a tourniquet applied to the thigh. Surgical approaches included the anteromedial and anterolateral portals of the knee joint. Arthroscopy was conducted first to inspect the joint, and a probe was used to identify the location, size, and type of the bone fragment. The edges of the bone fragment and the interior of the bone bed were freshened with a shaver.

Initially, the approach is made through the midline of the patellar tendon, with the arthroscope inserted as the observational portal. The anteromedial and anterolateral portals are utilized as the working portals, respectively, for inserting a suture anchor and passing sutures with a suture hook., At a knee flexion of 90°, through the anteromedial portal, an awl is inserted. The awl is then smoothly tapped into the harder bone quality at the posterior edge of the bone bed, followed by the successful placement of a suture anchor (InLoc anchor, Hangzhou Rejoin Mastin Medical Device Co, P.R. China). Suture hooks are used to pass two sutures through the anterior cruciate ligament on its medial and lateral sides, respectively. Then, PDS (polydioxanone) suture is utilized to pull both strands of the anchor sutures out. After the tail sutures are crossed, they are guided through the tissue between the ligament and the fracture fragment.

Utilizing an ACL aiming device, two minimal bone tunnels are created on the medial and lateral sides of the anterior edge of the bone bed. PDS sutures are then used to pull the anchor suture tails out of these tunnels. Under the surveillance of arthroscopy, a small hemostat is introduced through the anteromedial approach to adjust the suture cable to the appropriate position. Then, the hemostat is pressed onto the bone fragment, forcefully pressing the fragment towards the bone bed while gradually tightening the suture cable, which is then secured outside the tunnel with a locking suture anchor (GripLoc knotless anchor, Hangzhou Rejoin Mastin Medical Device Co, P.R. China). Finally, check the reduction of the bone fragment and the stability of the fixation (Fig. 2).

If, after tightening the suture bundle, there is still poor alignment or contact between the bone fragment and the bone bed, additional steps can be taken. Two strands of high-strength suture can be added to wrap around the ACL ligament, followed by the creation of two more mini bone tunnels. After adjusting the position of the bone fragment and pulling the reinforcement sutures through, tightening them significantly enhances the stability of the bone fragment and the reliability of the reduction.

Process of the arthroscopic transosseous suture bridge technique with mini tunnel: (a) bone bed preparation with a shaver; (b) tapping the awl into the harder bone quality at the posterior edge of the bone bed; (c) placement of the internal anchors; (d) Suture hook through ACL ligament; (e) Insertion of 1 mm K-wire with ACL aimer; (f) Manual drilling mini tunnel with modified epidural needle; (g) Adjust the position of the suture cable and assist in the reduction of the fracture using a small hemostat; (h) After tightening the tail suture with the locking suture anchor, the fracture fragment was securely fixed.

Before the end of the surgery, the knee joint was flexed and extended to carefully check whether the bone fragment was firmly fixed and whether the ACL had regained its tension, ensuring that the bone fragment had close contact and no displacement during extension. After thorough hemostasis, the wound was irrigated with a large amount of physiological saline and then sutured. Large cotton pads and elastic bandages were wrapped from the foot to above the knee joint.

Postoperatively, the affected limb was bandaged with an elastic bandage, and a knee brace was used to keep the knee in an extended position for four weeks. Isometric contraction exercises for the quadriceps muscles began on the first postoperative day. The knee flexion should not exceed 30° within the first two weeks post-surgery, reach 90° by four weeks, and achieve full range of motion by eight weeks. Partial weight-bearing with crutches was allowed after four weeks, and full weight-bearing was achieved by eight weeks post-surgery. Whether to return to sports or activity should be based on the process of fracture healing.

During follow-up, the duration of the surgery and the amount of bleeding were recorded. Symptoms such as swelling, pain, joint effusion, postoperative fracture reduction, and joint mobility were observed. X-rays were taken at 1, 3, 6, and 12 months post-surgery to observe whether the fracture line had healed and whether the position of the fracture fragment had returned to normal. At the end of the follow-up, the stability of the ligament was assessed using the anterior drawer test and the Lachman test. The knee joint functional scores was evaluated based on the Lysholm scores7 and International Knee Documentation Committee (IKDC) functional scores8.

Analysis was performed using the SPSS 22.0 statistical software. Data that conform to a normal distribution were represented as the mean ± standard deviation. The preoperative and postoperative Lysholm scores were compared using a paired t-test, with a P-value less than 0.05 indicating a statistically significant difference.

All patients had been followed up. Patients were followed for 12–18 months, averaging 15.6 months. The surgical duration averaged 52.7 min, ranging from 45 to 62 min. Approximately 10–30 mm of bleeding occurred during surgery. No neurovascular injuries were found. Three cases of postoperative joint swelling occurred and were alleviated with needle aspiration. By two months after surgery, swelling had decreased, pain had become less intense, and there were no restrictions on knee extension. Additionally, all patients achieved knee flexion beyond 120°. Fractures healed within 6–12 months postoperatively, with no instances of loosening, refracture, or displacement, and both the anterior drawer test and the Lachman test were negative (Fig. 3). By the end of the follow-up period, all patients could safely return to their previous level of sports or activity. The Lysholm and IKDC knee joint functional scores had significantly improved from preoperative levels. (Table 2).

This figure depicts images from a 23-year-old female patient. (a) The preoperative sagittal MRI shows the tibial avulsion fractures of the ACL; (b) the postoperative sagittal MRI, illustrates the post-surgical state and the position of the internally placed suture anchor (red arrows); (c) the postoperative coronal MRI, shows the position of the externally placed locking suture anchor (red arrows); (d) the lateral X-ray at 6 months postoperatively provides a view of the healing progress;

The findings of this study demonstrate that all fractures achieved healing within the six to twelve-month postoperative period, with no incidences of loosening, re-fracture, or displacement. Furthermore, there was a notable recovery in knee joint function, all patient could safely return to their previous level of sports or activity, as evidenced by significant improvements in Lysholm and IKDC functional scores at the final follow-up compared to preoperative levels. These outcomes are consistent with those reported in other studies10,11.

Tibial avulsion fractures of the ACL are relatively uncommon, typically affecting adolescents and young adults in the context of sports-related injuries1. The evolution of treatment approaches has shifted from conventional open reduction and internal fixation to less invasive arthroscopic techniques. These modern methods utilize a variety of fixation devices, including sutures, screws, wires, anchors, and buttons1,2,3,4,5,6. Early fixation techniques, such as those employing screws, wires, or loop plates, were found to be less suitable for the comminuted fractures and thin bone fragments often encountered in the adolescent population. These methods were associated with complications like bone fragment displacement, fragmentation, and rotational instability, primarily due to improper ACL tension restoration and inadequate fixation of bone fragments12.

In response, many in the surgical community have adopted the suture bridge technique, initially developed for rotator cuff repairs, for the treatment of ACL tibial avulsion fractures. This technique has shown promise13. Hapa et al.14, through biomechanical studies using an ovine model, confirmed that under cyclic loading, the strength of high-strength suture weaving fixation was significantly superior to screw and simple suture anchor fixation. Eggers et al.15 reported in biomechanical tests that the suture bridge technique, utilizing multiple anchors and high-strength sutures, could withstand a higher load to failure than screw and suture fixation. However, the use of multiple anchors can significantly increase surgical costs.

Therefore, the arthroscopic suture bridge technique, combined with transosseous tunnels and tail suture locking anchor fixation, may offer a highly suitable alternative. Boutsiadis et al.16 described an enhanced arthroscopic suture fixation technique for ACL avulsions, involving the creation of four angled 2.9 mm tibial tunnels and secure fixation with pegs after pulling the tail sutures through. This technique provides stable fixation and reduces the risks associated with bone bridge and tunnel issues, accommodating various fragment sizes. However, it might affect the fracture contact surface and carries the risk of growth disruption due to traversal of the epiphyseal area.

Our study combines the arthroscopic transosseous tunneling technique with the suture bridge technique, achieving a three-point fixation pattern. By employing this modified mini-tunnel technique, we are able to reduce the use of anchors and have the opportunity to choose multiple bone tunnels. This approach can anatomically reduce and immediately stabilize fixation, irrespective of the size of the avulsed bone fragments. Particularly in adolescents, where the avulsed bone fragments at the ACL tibial insertion site are often thin and prone to fragmentation, the strong tensile force from the high-strength sutures provides adequate support, allowing the ACL to regain tension. This is beneficial to rehabilitation training and recovery of joint function.

This retrospective study has a small sample size, potentially biasing the reliability of the findings. It also lacks long-term follow-up data, being based on short-term outcomes. Future large-scale and long-term studies are needed to bolster the research’s credibility.

In conclusion, the suture bridge technique adheres to the principle of tension-side fixation, with internal anchors capable of closing the inner edge of the bone block. The minimal impact of the mini tunnel on the bone bed is advantageous for fracture healing at the interface. The tail sutures are fixed on the distal side of the bone tunnel, successfully avoiding the epiphyseal plate. The arthroscopic transosseous suture bridge for repairing ACL tibial avulsion fractures with this mini tunnel technique has demonstrated a definite therapeutic effect, stable fixation, minimal impact on the bone bed, and is particularly well-suited for the treatment of ACL tibial avulsion fractures in adolescents (Fig. 4).

This figure presents images from a 9-year-old male patient. (a) The preoperative lateral X-ray shows the tibial spine avulsion fracture; (b) the preoperative sagittal MRI provides a detailed view of the thin and small fracture fragment at the ACL tibial insertion site; (c) in the postoperative lateral X-ray, no internally placed suture anchors were utilized; instead, the ACL was bundled with high-strength sutures and passed through two mini bone tunnels, where it was securely fixed using a single locking anchor (red arrows); (d) the postoperative anteroposterior X-ray demonstrates that the thin bone fragment was effectively stabilized by the locking suture anchor;

The data that support the findings of this study are provided within the supplementary information files.

Callanan, M. et al. Suture versus screw fixation of tibial spine fractures in children and adolescents: a comparative study. Orthop. J. Sports Med. 22 (7), 11. https://doi.org/10.1177/2325967119881961 (2019).

Article Google Scholar

Osti, L. et al. Arthroscopic treatment of tibial eminence fracture: a systematic review of different fixation methods. Br. Med. Bull. 118 (6), 73–90. https://doi.org/10.1093/bmb/ldw018 (2016).

Article PubMed PubMed Central Google Scholar

Li, J. et al. Arthroscopic fixation of tibial eminence fractures: a biomechanical comparative study of screw, suture, and suture anchor. Arthroscopy. 34 (5), 1608–1616. https://doi.org/10.1016/j.arthro.2017.12.018 (2018).

Article PubMed Google Scholar

Ding, J., Wan, L., Hou, X. & Gan, Y. Tension band wire fixation technique for anterior cruciate ligament tibial avulsion fracture: a new fixation technique. J. Knee Surg. 32 (03), 290–294. https://doi.org/10.1055/s-0038-1641173 (2019).

Article PubMed Google Scholar

Elqirem, Z., Alhanbali, M. & Sbieh, Y. Double-row fixation for avulsion of anterior cruciate ligament. Arthrosc. Tech. 8 (12), 1473–1477. https://doi.org/10.1016/j.eats.2019.07.030 (2019).

Article Google Scholar

Pandey, V., Cps, S., Acharya, K. & Rao, S. K. Arthroscopic suture pull-out fixation of displaced tibial spine avulsion fracture. J. Knee Surg. 30 (1), 28–35. https://doi.org/10.1055/s-0036-1579682 (2017).

Article PubMed Google Scholar

Schmitt, L. C., Paterno, M. V. & Huang, S. Validity and internal consistency of the international knee documentation committee subjective knee evaluation form in children and adolescents. Am. J. Sports Med. 38 (12), 2443–2447. https://doi.org/10.1177/0363546510374873 (2010).

Article PubMed Google Scholar

Lyshom, J. & Gillquist, J. Evaluation of knee ligament surgery results with special emphasis on use of a scoring scale. Am. J. Sports Med. 10 (3), 150–154. https://doi.org/10.1177/036354658201000306 (1982).

Article Google Scholar

Meyers, M. H. & McKeever, F. M. Fracture of the intercondylar eminence of the tibia. J. Bone Joint Surg. Am. 52 (8), 1677–1684 (1970).

Article CAS PubMed Google Scholar

Ezechieli, M. et al. Biomechanical comparison of different fixation techniques for reconstruction of tibial avulsion fractures of the anterior cruciate ligament. Int. Orthop. 37 (5), 919–923. https://doi.org/10.1007/s00264-013-1835-3 (2013).

Article PubMed PubMed Central Google Scholar

Kuang, S. D. et al. Figure-of-eight suture-button technique for fixation of displaced anterior cruciate ligament avulsion fracture. Orthop. Surg. 12 (3), 802–808. https://doi.org/10.1111/os.12682 (2020).

Article PubMed PubMed Central Google Scholar

Jang, K. M., Bae, J. H., Kim, J. G. & Wang, J. H. Novel arthroscopic fixation method for anterior cruciate ligament tibial avulsion fracture with accompanying detachment of the anterior horn of the lateral meniscus: three-point suture fixation. Injury. 44 (8), 1028–1032. 10.1016/ j.injury.2012.12.008 (2013).

Article PubMed Google Scholar

Sawyer, G. A. et al. Biomechanical analysis of suture bridge fixation for tibial eminence fractures. Arthroscopy. 28 (10), 1533–1539. https://doi.org/10.1016/j.arthro.2012.02.020 (2012).

Article PubMed Google Scholar

Hapa, O. et al. Biomechanical comparison of tibial eminence fracture fixation with high-strength suture, endo-button and suture anchor. Arthroscopy. 28 (5), 681–687. https://doi.org/10.1016/j.arthro.2011.10.026 (2012).

Article PubMed Google Scholar

Eggers, A. K. et al. Biomechanical evaluation of different fixation methods for tibial eminence fractures. Am. J. Sports Med. 35, 404–410. https://doi.org/10.1177/0363546506294677 (2007).

Article PubMed Google Scholar

Boutsiadis, A. et al. Arthroscopic 4-point suture fixation of anterior cruciate ligament tibial avulsion fractures. Arthrosc. Tech. 3 (6), 683–687. https://doi.org/10.1016/j.eats.2014.08.008 (2014).

Article Google Scholar

Download references

The authors thank all their colleagues for their kind help and all patients for their cooperation with our work.

Department of Orthopaedic Surgery, Affiliated Hospital of North Sichuan Medical College, South Maoyuan Road, Nanchong, 637000, Sichuan, China

Jin-Song Pu, Lin Zheng & Chang-Chun Jian

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

You can also search for this author in PubMed Google Scholar

All authors contributed to the study conception and design. Material preparation, data collection and analysis were performed by P J, Z L and J C. The first draft of the manuscript was written by P J and all authors commented on previous versions of the manuscript. All authors read and approved the final manuscript.

Correspondence to Jin-Song Pu.

The authors declare no competing interests.

This is an retrospective study. The Research Ethics Committee of the Affiliated Hospital of North Sichuan Medical College has approved this study (2024ER0186).

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Below is the link to the electronic supplementary material.

Supplementary Material 1

Open Access This article is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License, which permits any non-commercial use, sharing, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if you modified the licensed material. You do not have permission under this licence to share adapted material derived from this article or parts of it. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by-nc-nd/4.0/.

Reprints and permissions

Pu, JS., Zheng, L. & Jian, CC. Arthroscopic mini tunnel suture bridge for ACL tibial avulsion fractures repair. Sci Rep 14, 25096 (2024). https://doi.org/10.1038/s41598-024-77121-2

Download citation

Received: 04 July 2024

Accepted: 21 October 2024

Published: 23 October 2024

DOI: https://doi.org/10.1038/s41598-024-77121-2

Anyone you share the following link with will be able to read this content:

Sorry, a shareable link is not currently available for this article.

Provided by the Springer Nature SharedIt content-sharing initiative